These door stops were designed for use on large oceangoing vessels but can be used for all panels, gates or doors which must be firmly held in the presence of vibrations, draughts or sudden acceleration. They can be found in public buildings, on rolling stock, seagoing vessels and machine housings. The body of the door stop is slightly flexible and will compensate to a certain extent for poor fitting. Pole pieces have been treated to resist corrosion. The unit is supplied with the appropriate W counterplate.

Series 1

Wall mounted. The Compact magnet is fitted in a flexible neoprene sleeve.

Model	Holding Power (Kg)	B	E	D
CF 16-1	10	16	34	42
CF 22-1	20	22	43	54
CF 30-1	30	30	70	71.3

 

Color: Light gray, brown
Fixing: The polyamide base is screwed into the wall. The body is clipped onto this base and then locked into place using a retaining ring. 

 

Spacer for the C 22-1

In some cases, the C 22-1 door stop may not be high enough. This spacer will build out the distance between the magnetic surface and the wall. Two heights are available:  20mm and 30mm.

 

Series 2

 

Floor mounted. The Compact magnet is housed in a PVC sleeve.
Use:  For fixing onto a surface which is parallel to the direction of movement (e.g. floor)

 

Model	Holding Power (Kg)	B	D	E	H	J
CF 16-2	10	26	45.5	60	38	50
CF 22-2	20	26	45.5	60	38	50

Color: Light gray, brown, white, black
Fixing:   A polyamide plate is fixed to the wall and the body slid into position. The unit is locked in position by means of a retainer ring.

 

Counterplates

Round, with one single countersunk screw. The screw head must never protrude beyond the ground front surface. When fitting these counterplates, ensure that they are not fully screwed down so that they can take up some play.

Model	A	B	D
W 16	20	4	3.2
W 22	28	5.5	4.2
W 30	40	6	6.2

 

Back