BONDED Bremag compression molded NdFeB in CGS Units	Br	HcB	jHc	BHMax	Recoil Permeability	Density	Curie Temp	Max Temp	Temp Coefficient *
	Gauss	Oersteds	Oersteds	MGOe		Gm/cc	.'C	.'C	Br%/'C	Hc%/'C
B10-B	6850	5800	9100	10	1.10	5.9	360	150	0.105	0.40
B10-C	6350	5600	13900	8.8	1.15	5.9	470	150	0.070	0.40
SB90	6350	5400	9100	8.5	1.10	5.9	360	150	0.105	0.40
SB75	5300	4600	9100	6.2	1.10	5.9	360	150	0.105	0.40
SB65	4400	3900	9100	4.3	1.10	5.9	360	150	0.105	0.40
SB50	3400	3100	9100	2.6	1.10	5.9	360	150	0.105	0.40

Please click this  for a data curve
* For temperature coefficients the figures are negative unless otherwise stated.
The properties quoted are in the main nominals and mostly shape/geometry dependent. If certain characteristics are critical to the application , our advice is to obtain specific data either from the user's own tests or by request to the company.

These are representative grades and others are available upon request. Where practical we will produce grades for specific application.

BONDED Bremag compression molded NdFeB in SI Units	Br	HcB	jHc	BHmax	Recoil Permeability	Density	Curie Temp	Max Temp	Temp Coefficient *
	mT	kA/m	kA/m	kJ/m3		Gm/cc	.'C	.'C	Br%/'C	Hc%/'C
B10-B	685	460	722	79	1.10	5.9	360	150	0.105	0.40
B10-C	635	444	1102	70	1.15	5.9	470	150	0.070	0.40
SB90	635	428	722	67	1.10	5.9	360	150	0.105	0.40
SB75	530	365	722	49	1.10	5.9	360	150	0.105	0.40
SB65	440	309	722	34	1.10	5.9	360	150	0.105	0.40
SB50	340	246	722	21	1.10	5.9	360	150	0.105	0.40